Spreads Hub
  • Home
  • About Spreads Hub
  • Contact Us
  • Privacy Policy
  • Write For Us
Home  /  Tech  /  Cheap Aluminium Can Do Premium Work When the Surface Is Engineered

Cheap Aluminium Can Do Premium Work When the Surface Is Engineered

Phoebe October 17, 2026 Tech Comments are off
Cheap Aluminium Can Do Premium Work When the Surface Is Engineered

Engineers often associate a part’s performance with the metal from which it is made. Indeed, choosing a good alloy and ensuring it is properly machined, in accordance with the relevant data sheets, is the major part of any engineer’s work. But, as Punchline Gloucester reports that Poeton has appointed a new managing director to help engineers get the best from conventional materials, there is more to consider than this.

The most interesting comment from the article is that one can design with conventional metals and surface treat to extend their use. Designers can consider surface and material simultaneously.

A part is only as good as its surface!

When most components fail it is because of surface related wear, corrosion or friction. The bulk metal could well be adequate to meet the mechanical characteristics required for service, but not the surface. A typical example is the use of hard anodizing for wear resistance, where the surface is converted to a wear resistant surface, often far better than the original aluminium material would have performed.

Table of Contents

Toggle
  • Grown layers and added layers differ
  • Why dimensions must allow for treatment
  • Where ordinary alloys can replace exotic ones
  • What designers should decide at drawing stage

Grown layers and added layers differ

A black hard-anodised aluminium bracket with a bored bearing hole and mounting holes sits on a workbench

Anodising converts the surface by a chemical process to produce a hard wearing surface from within the metal itself, i.e. not a coating that can flake or wear. The surface layer is integral with the metal below it. Coatings, on the other hand, are applied as a separate layer and rely on adhesion to the metal below. They can wear and, in many cases, flake or peel off.

Why dimensions must allow for treatment

This layer grows out from the metal and so changes the size of the part. Thus it is normal practice to add the thickness of the anodised layer to the normal dimensions of a part when drawing it up. Tolerances too must be set up to take into account the anodising process. The normal practice is to add the tolerances for the anodising process to the normal machining tolerances.

Geometry also needs to be considered. Sharp edges and blind holes are treated differently to flat surfaces and need to be discussed with the surface finisher before the part is machined.

Where ordinary alloys can replace exotic ones

Hard anodising is typically a cold process which takes place in a controlled bath and results vary from alloy to alloy with some finishing better than others. However, by choosing a common, cost-effective alloy and surface treating it in an appropriate manner, it is often possible to achieve the properties of more expensive materials and designs. As illustrated by examples of aircraft and even space probes, this is a well-established design practice within the space sector and, indeed, amongst designers using a wide variety of engineering materials who consider surface engineering of conventional materials when designing parts.

What designers should decide at drawing stage

A very useful design tip is to list out the surface treatment(s) which you require on your drawings before ordering stock. If possible, get your surface treatment specialist to advise you which common materials form the best surface for your intended application. It may help you change to an alternative material, which is stocked cheaply by many suppliers.

Previous Article
Next Article

About Author

Phoebe

Related Posts

  • Tonnage Settings for Different Bending Materials

    Tonnage Settings for Different Bending Materials

    October 27, 2026
  • How to Choose a Snorkeling Camera for Florida Waters

    August 24, 2026
  • What are computer viruses?

    What are computer viruses?

    July 22, 2026

Recent Posts

  • Learn how water depth, wave action, and shoreline soil impact your dock choice. Pick the right floating or fixed dock for your property today
    Why Waterfront Conditions Should Influence the Type of Dock a Buyer Chooses November 14, 2026
  • Anglers browsing rods and reels at a fishing show in Oaks, Pennsylvania
    Philadelphia Fishing Show 2027: Dates, Hours, Admission, Vendors and Event Highlights November 10, 2026
  • A Film Revival Does Not Make a Good Night Out
    A Film Revival Does Not Make a Good Night Out October 31, 2026
  • Organising a Work Night Out Around a Tribute Show
    Organising a Work Night Out Around a Tribute Show October 28, 2026
  • Small Gyms Gain Most From a Local Strength Equipment Base
    Small Gyms Gain Most From a Local Strength Equipment Base October 28, 2026
  • Tonnage Settings for Different Bending Materials
    Tonnage Settings for Different Bending Materials October 27, 2026

Categories

  • Admission Guide
  • Apps
  • Aquarium
  • Auto
  • Bathroom
  • Beach
  • Beauty
  • Bedroom
  • Bike
  • Blog
  • Business
  • Business Ideas
  • Car
  • Career Advice
  • Celebrity Gossips
  • Child Care
  • Cricket
  • Desktop
  • Diet
  • Digital Marketing
  • DIY
  • Education
  • Entertainment
  • Exercise
  • Family Talks
  • Fashion Trends
  • Food and Fruit
  • Football
  • Forex
  • Garage
  • Garden
  • Health and Fitness
  • Hobby
  • Home Improvement
  • Hotel
  • Internet
  • Investment Ideas
  • Jewelry
  • Kitchen
  • Laptop
  • Lifestyle
  • Living Room
  • Management Ideas
  • Marketing Ideas
  • Mountain
  • Movies
  • Music
  • Networking
  • Opinion
  • Photography
  • Real Estate
  • Recipe
  • Relationship
  • Self Improvement
  • SEO
  • Shopping Guide
  • Smartphone
  • Sports
  • Style
  • Tech
  • Tennis
  • Travel
  • Website Design
  • Wedding
  • Weight Loss
  • Window
  • World

Archives

Categories

Theme by ThemesPie | Proudly Powered by WordPress